Vertical Swing Lift-Up Mechanism for Door w/ Guide Bar - Nickel/ Grey
|
|
Under Sink Drip Mats Aqua Design
|
|
|
|
|
Unique swing mechanism provides a lift-assist feature to help lift doors and hold at the open position. Sleek, compact design provides maximum access.
|
Undersink mat to protect the base of your undersink cabinet from water spills.
|
|
3D Adjustable Concealed Hinge 1130 (88 lbs Cap. Per Pair) (132 lbs / 3 pcs)
|
|
3D Adjustable Concealed Hinge 1131 (177 lbs Cap. Per Pair) (265 lbs / 3 pcs)
|
|
|
|
|
For use in a variety of applications, including table tops, doorways, closets, storage areas and more.
|
For use in a variety of applications, including table tops, doorways, closets, storage areas and more.
|
|
3D Adjustable Concealed Hinge 1230 (110 lbs Cap. Per Pair) (154 lbs / 3 pcs)
|
|
3D Adjustable Concealed Hinge Drilling Template Inserts
|
|
|
|
|
For use in a variety of applications, including table tops, doorways, closets, storage areas and more.
|
Drilling Fixture for the 3D Adjustable Concealed Hinge (1131 & 1230 series)
|
|
3D Adjustable Concealed Hinge 1030 (110 lbs Cap. Per Pair) (154lbs / 3 pcs) - Stainless Steel
|
|
3D Adjustable Concealed Hinge Drilling Fixture (for 1130 & 1030 series)
|
|
|
|
|
For use in a variety of applications, including table tops, doorways, closets, storage areas and more.
|
Drilling Fixture for the 3D Adjustable Concealed Hinge (1130 & 1030 series)
|
|
3D Adjustable Concealed Hinge Drilling Fixture (for 1131 & 1230 series)
|
|
7/8" Recovery Bead Stile & Rail Bit (1/2" Shank) - Carbide Tip
|
|
|
|
|
Drilling Fixture for the 3D Adjustable Concealed Hinge (1131 & 1230 series)
|
Use to produce glass doors that look equally good from the front and back.
|
|
1-5/8" Vertical Raised Panel Bit (1/2" Shank) - Carbide Tip
|
|
5/8" 2+2 Raised Panel Bit ( 1/2" Shank) - Carbide Tip
|
|
|
|
|
Use to produce full sized raised panels by feeding 3/4" stock vertically.
|
Ideal for creating raised panels for doors and paneling, as well as decorative tops, plaques and molding.
|
|
1/2" 2+2 Raised Panel Bit (1/2" Shank) - Carbide Tip
|
|
Single Flute Straight Bit 1" H x 1/4" Dia (1/4" Shank) - Carbide Tip
|
|
|
|
|
Ideal for creating raised panels for doors and paneling, as well as decorative tops, plaques and molding.
|
This single flute Freud bit was designed for high production work with maximum chip clearance for fast feed rates. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
Double Flute Straight Bit 3/8" H x 1/8" Dia (1/4" Shank) - Carbide Tip
|
|
Double Flute Straight Bit 1/2" H x 3/16" Dia (1/4" Shank) - Carbide Tip
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
Double Flute Straight Bit 5/8" H x 1/4" Dia (1/4" Shank) - Carbide Tip
|
|
Double Flute Straight Bit 7/8" H x 1/4" Dia (1/4" Shank) - Carbide Tip
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
Double Flute Straight Bit 1" H x 1/4" Dia (1/4" Shank) - Carbide Tip
|
|
Double Flute Straight Bit 1" H x 9/32" Dia (1/4" Shank) - Carbide Tip
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
Double Flute Straight Bit 1" H x 5/16" Dia (1/4" Shank) - Carbide Tip
|
|
Double Flute Straight Bit 7/8" H x 3/8" Dia (1/4" Shank) - Carbide Tip
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
Double Flute Straight Bit 1-1/4" H x 3/8" Dia (1/4" Shank) - Carbide Tip
|
|
Double Flute Straight Bit 3/4" H x 15/32" Dia for Undersized Plywood (1/4" Shank) - Carbide Tip
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
Double Flute Straight Bit 1" H x 7/16" Dia (1/4" Shank) - Carbide Tip
|
|
Double Flute Straight Bit 3/4" H x 1/2" Dia (1/4" Shank) - Carbide Tip
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
Double Flute Straight Bit 7/8" H x 1/2" Dia (1/4" Shank) - Carbide Tip
|
|
Double Flute Straight Bit 1" H x 1/2" Dia (1/4" Shank) - Carbide Tip
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
Double Flute Straight Bit 1-1/4" H x 1/2" Dia (1/4" Shank) - Carbide Tip
|
|
Double Flute Straight Bit 3/4" H x 9/16" Dia (1/4" Shank) - Carbide Tip
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
Double Flute Straight Bit 1-1/4" H x 5/8" Dia (1/4" Shank) - Carbide Tip
|
|
Double Flute Straight Bit 3/4" H x 11/16" Dia (1/4" Shank) - Carbide Tip
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
3/4" Straight Bit (2 Flute • 1/2" Shank) - Carbide Tip
|
|
1 1/4" Straight Bit (2 Flute • 1/2" Shank) - Carbide Tip
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
1 1/4" Straight Bit (2 Flute • 1/2" Shank) - Carbide Tip
|
|
1 1/2" Straight Bit (2 Flute • 1/2" Shank) - Carbide Tip
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
1 1/2" Straight Bit (2 Flute • 1/2" Shank) - Carbide Tip
|
|
2 1/2" Straight Bit (2 Flute • 1/2" Shank) - Carbide Tip
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
2" Straight Bit (2 Flute • 1/2" Shank) - Carbide Tip
|
|
1 1/4" Straight Bit (Undersized Plywood • 1/2" Shank) - Carbide Tip
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|