Stealth Brace
|
|
Shelf Support 1/4" Black
|
|
|
|
|
The Stealth SpeedBrace supports your countertop and bar overhangs with no need for a visible kicker or expensive corbels
|
|
|
Locking clip 1/4" white (1000)
|
|
Shelf support 5mm black
|
|
|
|
|
|
|
|
Floating Shelf - Maple
|
|
Heavy Duty Single Bracket - Brushed Zinc
|
|
|
|
|
Perfect for today's transitional and contemporary kitchen and bath styling. Made in the USA.
|
Strong brackets that were designed to tolerate heavy loads. Featuring a unique locking mechanism for added security and immobilization.
|
|
Heavy Duty Wall Mount Standard - Bright Zinc
|
|
Workstation Heavy-Duty Bracket
|
|
|
|
|
Strong single slotted standards that were designed to tolerate heavy loads.
|
These workstation brackets feature a 45 degree notch to allow for a wall cleat and wiring. Use in applications such as counter tops, work surfaces, book shelves, closet shelves or benches.
- 1/8" steel construction
- 1,000 lb load capacity per pair
- Multiple 1/4" mounting holes per side
- 45 degree notch to allow for a wall cleat and wiring
- Texture powder coat finish
- Brackets are reversible
|
|
256 Steel Shelf Support for 255 Standards
|
|
255 Recessed Aluminum Standard - Aluminum
|
|
|
|
|
Fits all 255 series recessed standards.
|
The 255 Series Pilasters are designed for built-in adjustable shelving applications. They are most commonly used in custom cabinetry and bookcase type applications. If you are looking to install shelving with minimum visibilty of the hardware, this is likely what you are looking for. Knape & Vogt makes these pilasters out of 17 gauge aluminum that has a profile of 5/8" wide by 3/16" deep.
|
|
255 Recessed Aluminum Standard - Brass
|
|
255 Recessed Steel Standard - Zinc
|
|
|
|
|
The 255 Series Pilasters are designed for built-in adjustable shelving applications. They are most commonly used in custom cabinetry and bookcase type applications. If you are looking to install shelving with minimum visibilty of the hardware, this is likely what you are looking for. Knape & Vogt makes these pilasters out of 17 gauge aluminum that has a profile of 5/8" wide by 3/16" deep.
|
The 255 Series Pilasters are designed for built-in adjustable shelving applications. They are most commonly used in custom cabinetry and bookcase type applications. If you are looking to install shelving with minimum visibilty of the hardware, this is likely what you are looking for. Knape & Vogt makes these pilasters out of 17 gauge aluminum that has a profile of 5/8" wide by 3/16" deep.
|
|
255 Recessed Steel Standard - White
|
|
80 Wall Mount Standard - Anodized
|
|
|
|
|
The 255 Series Pilasters are designed for built-in adjustable shelving applications. They are most commonly used in custom cabinetry and bookcase type applications. If you are looking to install shelving with minimum visibilty of the hardware, this is likely what you are looking for. Knape & Vogt makes these pilasters out of 17 gauge aluminum that has a profile of 5/8" wide by 3/16" deep.
|
Standards can be mounted to most any type of wall. Reinforced brackets lock into slotted standards for strong, secure, weight-bearing support. Brackets are vertically adjustable in 1" increments.
|
|
87 Heavy Duty Wall Mount Standard - Anodized
|
|
85 Wall Mount Double Standard - Anodized
|
|
|
|
|
The 87 Series standard is part of the strongest KV bracket and standard combination available. The 87 Series standard has a 2" slot adjustment that allows for adjustability while maintining its very rigid structural integrity, which it the strongest standard in the business.
|
This double-slotted standard is built to stand the test of weight and time. It is shallow in depth and wide in width when installed to allow for maximum stability in heavy-duty installations. Designed for long runs of shelving. These standards are compatible with 1" vertically adjustable 185 Series brackets. The profile of these standards are 1-1/4" wide by 1/2" deep.
|
|
180 Bracket - Anodized
|
|
187 HD Bracket - Anodized
|
|
|
|
|
The strong, durable, adjustable shelving hardware that made KV famous. This functional hardware can be used for storage and display applications in retail stores, grocery stores, light warehouses, light industrial, repair garages, maintenance storage, business offi ce storage, and residential storage. For use with 80 standards. These brackets are adjustable in 1" vertical increments.
|
The 186 and 187 Series standards are part of the strongest Knape & Vogt bracket and standard combination available. These brackets feature the "lever lock" feature, which allows these brackets to be the easiest to install in its super-duty weight class. These lever locks also allow the brackets to fasten to the 87 Series standards with extra secuity and provide additional stability in the process. These brackets are adjustable in 2" vertical increments when used with the 87 Series standards.
|
|
185 Double Slotted Bracket
|
|
183 Flange Bracket (Left) - Anochrome
|
|
|
|
|
Designed to be used with the 85 Series standards, this bracket is often called "old reliable." With its double bracket design, this bracket provides any installation with a durability that is unmatched in the market. In addition, this bracket is the most precise bracket manufactured in the market that allows corner installations to meet as square in the square in the corner as possible. Ideal for residential uses such as supporting workbenches or countertops in utility rooms. Also, ideal for shelving in retail stores and industrial warehouses. Great for areas receiving frequent use and rough handlingThese brackets are only to be used with KV 85 Series standards, which will allow for 1" vertical adjustability of shelving.
|
These shelf brackets are designed with flanges containing keyhole style mounting holes to allow the quick and easy fixturing of shelving to these brackets. This allows these brackets, with shelving attached, to remain firmly in place when it is used in applications that involve heavy usage. The most common of these is in retail store fixtures and displays or the records room. Use these brackets with the 83 Series standards for an optimal installation. This bracket is adjustable in 1" vertical increments.
|
|
183 Flange Bracket (Right) - Anochrome
|
|
179 Adjustable Angle Bracket (For 80 Standards) - Anodized
|
|
|
|
|
These shelf brackets are designed with flanges containing keyhole style mounting holes to allow the quick and easy fixturing of shelving to these brackets. This allows these brackets, with shelving attached, to remain firmly in place when it is used in applications that involve heavy usage. The most common of these is in retail store fixtures and displays or the records room. Use these brackets with the 83 Series standards for an optimal installation. This bracket is adjustable in 1" vertical increments.
|
This shelf bracket allows for four different angles to display shelving: 15 degrees, 30 degreees , 45 degrees and 90 degrees (level). It is used for display purposes, work surfaces and the like. It is designed for use with standards that provide 1" vertical adjustability, including the 70, 80 and 83 series standards.
|
|
Wall Mount 4 Position Folding Spring Shelf Support (90°, 80°, 70° & Closed) - Zinc
|
|
Heavy Duty Shelf Bracket
|
|
|
|
|
The Knape & Vogt 206 Series folding bracket is a 4 position bracket (0, 70, 80 and 90 degree positions) that is perfect choice for creating a temporary work area when space is tight and flexability is critical.
|
Made from heavy 3/16" steel with a epoxy finish.
|
|
Silhouette Steel Shelf Bracket
|
|
L-Peg Supports w/ Hole
|
|
|
|
|
KV decorative shelf brackets beautifully complement all KV shelves in a variety of applications, including bath, vanity, children’s bedrooms and collectibles display. Heavy-duty epoxy coated steel.
|
Plated Steel with 1 hole. Material thickness 1/16".
|
|
L-Peg Supports w/ Sleeve
|
|
Sleeves (100 PACK)
|
|
|
|
|
Plated Steel with sleeve. Material thickness 1/16".
|
Plated steel construction.
|
|
Spoon Clips
|
|
5mm Locking Clip - 3/4" OR 1" Material (16 PACK) - Clear
|
|
|
|
|
Steel construction. Material thickness 1/4".
|
Plastic shelf clip features locking mechanism to hold shelfs in place, even during shipping.
|
|
5mm Plastic Support w/ Metal Pin (100 PACK) - White
|
|
5mm Plastic Support w/ Metal Pin (100 PACK) - Clear
|
|
|
|
|
Plastic rest with galvanized steel pin.
|
Plastic rest with galvanized steel pin.
|
|
3" Steel Shelf Support for 255 Standards - Zinc
|
|
Shelf End Rest (For KV 187 Bracket) - Anodized
|
|
|
|
|
Three-inch, non-handed shelf bracket for use with solid shelf types and the 255 Series pilaster standards. Bright Zinc finish.
|
Works with 1" adjustment standards and brackets.
|
|
Shelf Center Rest (For KV 187 Bracket) - Anodized
|
|
Shelf Front Rest (for KV 187 Bracket) - Anodized
|
|
|
|
|
Works with 1" adjustment standards and brackets.
|
Works with 1" adjustment standards and brackets.
|
|
Bottom Socket (For KV 80 Standards) - Anodized
|
|
Bottom Socket (For KV 83 Standards) - Anodized
|
|
|
|
|
Works with 1" adjustment standards and brackets.
|
Works with 1" adjustment standards and brackets.
|
|
Top Socket (For KV 80 Standards) - Anodized
|
|
Top Socket (For KV 83 Standards) - Anodized
|
|
|
|
|
Works with 1" adjustment standards and brackets.
|
Works with 1" adjustment standards and brackets.
|
|