|
Dual Cut Laminate Files
|
|
Mill Standard Files
|
|
|
|
|
|
|
Specifically designed for the woodworking industry for filing high pressure laminate and solid surface. These files cut faster and clog less than regular files.
|
Specifically designed for the woodworking industry for filing high pressure laminate and solid surface. These files cut faster and clog less than regular files.
|
|
|
|
Flat Coarse Laminate Files
|
|
All Purpose Files
|
|
|
|
|
|
|
Specifically designed for the woodworking industry for filing high pressure laminate and solid surface. These files cut faster and clog less than regular files.
|
Specifically designed for the woodworking industry for filing high pressure laminate and solid surface. These files cut faster and clog less than regular files.
|
|
|
|
Cutter for Decorative Laminate
|
|
Euro Bit Adapter for 7/64" X 40mm Bit
|
|
|
|
|
|
|
Carbide tipped cutter. Use to cut decorative laminate. Length 6".
|
Boring bit adapter with carbide tip-brad point. Use with the Euro Bit Self Centering Drill Tool.
|
|
|
|
Corner Chisel 3/8"
|
|
Laminate Roller - 3"
|
|
|
|
|
|
|
Use your router first to remove most of the material for a hinge mortise, then place this self-aligning chisel up against each mortise corner, and hammer the spring-loaded chisel shaft once to cut a perfect 90 degree corner for a perfect-fitting hinge plate. Cutting of 3/8” will work to a depth of 5/8”.
|
Roller for high-pressure laminate.
|
|
|
|
Euro 5mm X 70mm Rh Bit
|
|
Euro 1/4" x 70mm Rh Bit
|
|
|
|
|
|
Boring bit with carbide tip-brad point. Use with the Euro Bit Self Centering Drill Tool.
|
Boring bit with carbide tip-brad point. Use with the Euro Bit Self Centering Drill Tool.
|
|
|
|
Curved Frame Laminate Roller - 3"
|
|
Laminate Seam Roller - 2"
|
|
|
|
|
|
|
Curved solid frame J-roller for laminate.
|
Seam roller for laminate with a ball bearing system.
|
|
|
|
Euro 32 Template - 32mm Line Boring Jig
|
|
Euro Bit Self Centering Drill Bit
|
|
|
|
|
|
32mm Line Boring Jig used to drill 1/4" holes in cabinet installation. Required the Euro Bit Self Centering Drilling Tool.
|
The Euro-Bit self-centering drilling tool is the only drilling tool to be specifically engineered to use carbide tipped brad point style bits of different sizes.
|
|
|
|
Euro Handle-It Drilling Jig
|
|
Wall and Counter Laminate Roller - 7 1/4"
|
|
|
|
|
|
|
Euro handle and knob drilling tool, installs handles as large as 24" (60mm).
|
Roller for large-surface laminate.
|
|
|
|
Euro Uniguide Drawer Guide Installation Tool
|
|
Euro Drill Hinge Boring Tool
|
|
|
|
|
|
|
The Euro-Uniguide features a set of aluminum guide rails, with four polycarbonate templates attached with thumb screws.
|
Euro Drill Hinge Boring Tool is both usable on a drill press for shop use or on a standard 3/8" electric drill motor for hand held applications. Used in cabinet installation.
|
|
|
