|
Freud Diablo 7 1/4" x 24 ATB x 5/8" Framing Saw Blade
|
|
Freud Diablo 6 1/2" x 24 ATB x 5/8" Framing Saw Blade
|
|
|
|
|
|
|
This blade cuts rough framing lumber, high quality finish lumber, plywood, OSB, and hardboard iding with the smoothest, fastest and most accurate cut.
|
Diablo's thin kerf trim saw blade is ideal for portable and low powered saws on the jobsite.
|
|
|
|
Freud Diablo 7 1/4" x 24 ATB x 5/8" Framing Saw Blade (Bulk 2 Pack)
|
|
Freud Diablo 7-1/4" x 40 ATB x 5/8" Finishing Saw Blade
|
|
|
|
|
|
|
Diablo’s next generation 7-1/4” 24T Framing Blade with new Tracking Point™ Tooth design delivers maximum life and durability with effortless cutting performance.
|
Diablo Finish blades are the perfect choice for excellent rips and crosscuts using a portable saw. They deliver a smoother edge than framing blades, but still provide an excellent combination of cutting speed and long life.
|
|
|
|
Freud Diablo 8 1/4" x 24 ATB x 5/8" Framing Saw Blade
|
|
Freud Diablo 6 1/2" x 40 ATB x 5/8" Finish/Plywood Trim Saw Blade
|
|
|
|
|
|
|
Diablo's Framing blade is ideal for general construction applications, including fast, efficient ripping and crosscutting.
|
Diablo Finish blades are the perfect choice for excellent rips and crosscuts using a portable saw.
|
|
|
|
Freud Diablo 10" x 24 ATB x 5/8" Ripping Saw Blade
|
|
Freud Diablo 10" x 40 ATB x 5/8" General Purpose Saw Blade
|
|
|
|
|
|
|
Diablo's blade cuts rough framing lumber, high quality finish lumber, plywood, OSB, and hardboard siding with the smoothest, fastest and most accurate cut.
|
Diablo's general purpose blade is ideal for cutting oak, pine, plywood, pressure treated lumber and beams.
|
|
|
|
Freud Diablo 7 1/4" x 56 TCG x 5/8" Non-Ferrous Metal and Plastic Cutting Saw Blade
|
|
Freud Diablo 10" x 50 ATB x 5/8" Combination Saw Blade
|
|
|
|
|
|
|
Diablo's specialty Non-Ferrous/Plastics thin kerf blade has a Triple Chip Grind (TCG) Tooth Design for long life and a clean, burr-free finish.
|
Diablo's combination blade is ideal for ripping and crosscutting wood & wood composites with the goal of a smooth finish.
|
|
|
|
Freud Diablo 10" x 60 Hi ATB x 5/8" Fine Finish Saw Blade
|
|
Freud Diablo 12" x 60 ATB x 1" Combination Saw Blade
|
|
|
|
|
|
|
Fine Finish blades let trim crews get the most out of sliding or “chop” style miter saws, as well as jobsite or workshop table saws.
|
Diablo's combination blade is ideal for ripping and crosscutting wood & wood composites with the goal of a smooth finish.
|
|
|
|
Freud Diablo 8 1/2" x 60 ATB x 5/8" Fine Finish Saw Blade
|
|
Freud Diablo 10" x 80 ATB x 5/8" Ultimate Finish Saw Blade
|
|
|
|
|
|
|
Diablo's Fine Finish blade is the ideal choice for trim carpenters because it leaves a smooth surface that requires little to no sanding.
|
Ultra Finish blades let trim crews get the most out of sliding or “chop” style miter saws, as well as jobsite or workshop table saws.
|
|
|
|
Freud Diablo 12" x 80 Hi ATB x 1" Fine Finish Saw Blade
|
|
Freud Diablo 10" x 90 ATB x 5/8" Ultimate Flawless Finish Saw Blade
|
|
|
|
|
|
|
Fine Finish blades let trim crews get the most out of sliding or “chop” style miter saws, as well as jobsite or workshop table saws.
|
Diablo’s Ultimate Flawless Finish saw blades with Axial Shear Face Grind (ASFG) tooth geometry delivers precise, splinter-free cuts on fine molding with no rework required.
|
|
|
|
Freud Diablo 10" x 84 TCG x 5/8" Carbide Saw Blade
|
|
Freud Diablo 7 1/4" x 4 Tooth Polycrystalline Diamond Tipped TCG Hardie Fiber Cement Saw Blade with 5/8" Arbor
|
|
|
|
|
|
|
Diablo's specialty Non-Ferrous/Plastics thin kerf blade has a Triple Chip Grind (TCG) Tooth Design for long life and a clean, burr-free finish.
|
Diablo HardieBlade™ is the only approved PCD (PolyCrystalline Diamond) tipped fiber cement blade recommended by James Hardie Building Products.
|
|
|
|
Freud Diablo 12" x 100 ATB x 1" Ultimate Flawless Finish Saw Blade
|
|
Freud Diablo 12" x 96 TCG x 1" Ultimate Fine Finish Non-Ferrous Metal/Plastic Saw Blade
|
|
|
|
|
|
|
Diablo’s Ultimate Flawless Finish saw blades with Axial Shear Face Grind (ASFG) tooth geometry delivers precise, splinter-free cuts on fine molding with no rework required.
|
Diablo's blade features a thin kerf triple chip design that is specially designed to cut laminate flooring, double-sided laminates and melamine cleanly, leaving a smooth finish with no chipping or tear-out.
|
|
|
