|
Double Flute Straight Bit 3/8" H x 1/8" Dia (1/4" Shank) - Carbide Tip
|
|
Single Flute Straight Bit 1" H x 1/4" Dia (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
This single flute Freud bit was designed for high production work with maximum chip clearance for fast feed rates. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
Double Flute Straight Bit 1/2" H x 3/16" Dia (1/4" Shank) - Carbide Tip
|
|
Double Flute Straight Bit 1" H x 9/32" Dia (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
Double Flute Straight Bit 7/8" H x 3/8" Dia (1/4" Shank) - Carbide Tip
|
|
Double Flute Straight Bit 1" H x 5/16" Dia (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
Double Flute Straight Bit 7/8" H x 1/4" Dia (1/4" Shank) - Carbide Tip
|
|
Double Flute Straight Bit 5/8" H x 1/4" Dia (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
Double Flute Straight Bit 1" H x 1/4" Dia (1/4" Shank) - Carbide Tip
|
|
Double Flute Straight Bit 1" H x 1/2" Dia (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
Double Flute Straight Bit 1-1/4" H x 3/8" Dia (1/4" Shank) - Carbide Tip
|
|
Double Flute Straight Bit 1" H x 7/16" Dia (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
Double Flute Straight Bit 3/4" H x 1/2" Dia (1/4" Shank) - Carbide Tip
|
|
Double Flute Straight Bit 3/4" H x 9/16" Dia (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
Double Flute Straight Bit 3/4" H x 11/16" Dia (1/4" Shank) - Carbide Tip
|
|
1 1/4" Straight Bit (2 Flute • 1/2" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
Double Flute Straight Bit 7/8" H x 1/2" Dia (1/4" Shank) - Carbide Tip
|
|
3/4" Straight Bit (2 Flute • 1/2" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
Double Flute Straight Bit 1-1/4" H x 1/2" Dia (1/4" Shank) - Carbide Tip
|
|
Double Flute Straight Bit 3/4" H x 15/32" Dia for Undersized Plywood (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
1 1/4" Straight Bit (2 Flute • 1/2" Shank) - Carbide Tip
|
|
1 1/2" Straight Bit (2 Flute • 1/2" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
1/2" Mortising Bit (1/4" Shank) - Carbide Tip
|
|
Down Spiral Bit (1/4" Shank) - 3/4" - Solid Carbide
|
|
|
|
|
|
|
Freud’s Mortising Bits are designed with deep center gullets for maximum material removal without chip loading. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud’s solid carbide down spiral bits are ideal for smooth, chip-free routing where chip removal is not a problem. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
1 1/2" Straight Bit (2 Flute • 1/2" Shank) - Carbide Tip
|
|
1" Straight Bit (2 Flute • 1/2" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
3/4" Mortising Bit (1/4" Shank) - Carbide Tip
|
|
2" Straight Bit (2 Flute • 1/2" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud’s Mortising Bits are designed with deep center gullets for maximum material removal without chip loading. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
Down Spiral Bit (1/4" Shank) - 1" - Solid Carbide
|
|
Double Flute Straight Bit 1-1/4" H x 5/8" Dia (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud’s solid carbide down spiral bits are ideal for smooth, chip-free routing where chip removal is not a problem. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
1/2" Mortising Bit (1/2" Shank) - Carbide Tip
|
|
1 1/4" Straight Bit (2 Flute • 1/2" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud’s Mortising Bits are designed with deep center gullets for maximum material removal without chip loading. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
1 1/4" Straight Bit (Undersized Plywood • 1/2" Shank) - Carbide Tip
|
|
2 1/2" Straight Bit (2 Flute • 1/2" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
3/8" Top Bearing Mortising Dado Bit (1/2" Shank) - Carbide Tip
|
|
Up Spiral Router Bit (1/2" Shank) - 1 1/4" - Solid Carbide
|
|
|
|
|
|
|
Freud’s Mortising Bits are designed with deep center gullets for maximum material removal without chip loading. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud’s solid carbide up spiral bits combine effective chip removal with a cut that can’t be matched by standard straight bits. Ideal for production settings. Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
1 1/4" Straight Bit (2 Flute • 1/2" Shank) - Carbide Tip
|
|
Down Spiral Bit (1/2" Shank) - 1 1/4" - Solid Carbide
|
|
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud’s solid carbide down spiral bits are ideal for smooth, chip-free routing where chip removal is not a problem. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
