|
Euro Replacement Bearing 1/2"
|
|
Euro Replacement Bearing 3/4"
|
|
|
|
|
|
|
Replacement bearing for # BITETH (Laminate Trimmer with Euro Square Bearing Router Bit).
|
Replacement bearing for # BITETT (Laminate Trimmer with Euro Square Bearing Router Bit).
|
|
|
|
Flush Laminate Trim Bit (1/4" Shank) - 3/8" - Solid Carbide
|
|
1" Two Flute Flush Trimming Bit (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
Solid micrograin carbide extends the cutting life and the self-piloting feature eliminates the expense and upkeep of a ball bearing assembly. Cuts all plastic laminates. Use on portable routers and laminate trimmers for trimming plastic laminate.
|
These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a superior finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers.
|
|
|
|
1/2" Two Flute Flush Trimming Bit (1/4" Shank) - Carbide Tip
|
|
1" Two Flute Flush Trimming Bit (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a superior finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers.
|
These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a superior finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers.
|
|
|
|
1/2" Two Flute Flush Trimming Bit (1/4" Shank) - Carbide Tip
|
|
1" Two Flute Flush Trimming Bit (1/2" Shank) - Carbide Tip
|
|
|
|
|
|
|
These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a superior finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers.
|
These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a superior finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers.
|
|
|
|
1" Two Flute Flush Trimming Bit (3/8" Shank) - Carbide Tip
|
|
1 1/2" Two Flute Flush Trimming Bit (1/2" Shank) - Carbide Tip
|
|
|
|
|
|
|
These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a superior finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers.
|
These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a superior finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers.
|
|
|
|
1/2" Three Flute Flush Trimming Bit (1/4" Shank) - Carbide Tip
|
|
9/16" Top Bearing Trim Bit (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a superior finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers.
|
The top mounted bearings on these bits make them ideal for lettering and other template work where the work piece is being grooved or routed out. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers.
|
|
|
|
1" Top Bearing Trim Bit (1/4" Shank) - Carbide Tip
|
|
9/16" Top Bearing Trim Bit (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
The top mounted bearings on these bits make them ideal for lettering and other template work where the work piece is being grooved or routed out. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers.
|
The top mounted bearings on these bits make them ideal for lettering and other template work where the work piece is being grooved or routed out. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers.
|
|
|
|
1" Top Bearing Trim Bit (1/4" Shank) - Carbide Tip
|
|
1" Top Bearing Trim Bit (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
The top mounted bearings on these bits make them ideal for lettering and other template work where the work piece is being grooved or routed out. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers.
|
The top mounted bearings on these bits make them ideal for lettering and other template work where the work piece is being grooved or routed out. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers.
|
|
|
|
1" Three Flute Flush Trimming Bit (1/4" Shank) - Carbide Tip
|
|
1" Three Flute Flush Trimming Bit (1/2" Shank) - Carbide Tip
|
|
|
|
|
|
|
These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a superior finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers.
|
These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a superior finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers.
|
|
|
|
29/64" Two Flute Bevel Trim Bit (1/4" Shank) - Carbide Tip
|
|
1" Flush Trimming V Groove BIT (1/2" Shank) - Carbide Tip
|
|
|
|
|
|
|
The 41 Series Bits provide a range of bevels from 8 degrees to 45 degrees and feature a ball bearing guide. Cuts all plastic laminates. Use on Hand-held routers, table-mounted portable routers, and laminate trimmers for trimming plastic laminate.
|
Adds small, decorative “V” groove while bringing a cabinet frame flush with the front of the cabinet, or trimming a laminated top. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers.
|
|
|
|
3/4" Top Bearing Trim Bit (1/4" Shank) - Carbide Tip
|
|
Laminate Trimmer with Euro Square Bearing Router Bit - 1/2" Cut Dia
|
|
|
|
|
|
|
The top mounted bearings on these bits make them ideal for lettering and other template work where the work piece is being grooved or routed out. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers.
|
Industrial quality carbide tipped laminate trim bit with the EuroTM Square Bearings. The bits are designed according to specifications with a slight taper allowing for adjustment up or down on the work edge to finish off the edge with a smooth and burr free cut. The square bearing is manufactured with a non-stick Teflon® which won't mark your edge so it can be easily wiped clean.
- Overall length: 1 3/4" (44.45 mm)
- Shank diameter: 1/4" (6.35 mm)
- Cut diameter: 1/2" (12.7 mm)
Needed replacement bearing:
- # BITETHB (replacement bearing) for # BITETH
|
|
|
|
Laminate Trimmer with Euro Square Bearing Router Bit - 3/4" Cut Dia
|
|
1 1/4" Double Bearing Trim Bit (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
Industrial quality carbide tipped laminate trim bit with the EuroTM Square Bearings. The bits are designed according to specifications with a slight taper allowing for adjustment up or down on the work edge to finish off the edge with a smooth and burr free cut. The square bearing is manufactured with a non-stick Teflon® which won't mark your edge so it can be easily wiped clean.
- Overall length: 2 3/8" (60.325 mm)
- Shank diameter: 1/4" (6.35 mm)
- Cut diameter: 3/4" (19.05 mm)
Needed replacement bearing:
- # BITETTB (replacement bearing) for # BITETT
|
The top mounted bearings on these bits make them ideal for lettering and other template work where the work piece is being grooved or routed out. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers.
|
|
|
|
2' Helix Flush Trim Bit (1/2" shank) - carbide tip
|
|
1 Top Bearing Trim Bit (1/2" Shank) - Carbide Tip
|
|
|
|
|
|
|
Downshear cutting angle produces a slicing action for chip-free, splinter-free cuts on the top surface of laminates and veneers. The shear action also delivers easier, smooth cuts in thick materials. The 3/4" diameter body and full 1" or 2" cutting length provide the stability and cutting capacity for thick stock or for routing multiple parts with a template. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers.
|
The top mounted bearings on these bits make them ideal for lettering and other template work where the work piece is being grooved or routed out. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers.
|
|
|
|
1 1/4" Top and Bottom Bearing Trim Bit (1/4" Shank) - Carbide Tip
|
|
1 1/2" Top Bearing Trim Bit (1/2" Shank) - Carbide Tip
|
|
|
|
|
|
|
The top mounted bearings on these bits make them ideal for lettering and other template work where the work piece is being grooved or routed out. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers.
|
The top mounted bearings on these bits make them ideal for lettering and other template work where the work piece is being grooved or routed out. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers.
|
|
|
